SOLAR Industrial Partner

6220-1A - Solar 6220-1A Audio Isolation Transformer Simple Type: Transformer

larger image

Request Quote
For Price
Part Number:
6220-1A
Model Number:
6220-1A
Make:
SOLAR
Lead Time:
Available
Qty In Stock:
Available

Solar 6220-1A Audio Isolation Transformer Simple Type: Transformer

The Solar 6220-1A Audio Isolation Transformer was especially designed for screen room use in making conducted audio frequency susceptibility tests as required by MIL-STD-461/462 and other EMI specifications. The 6220-1A may also be used as a pickup device to measure low frequency EMI currents at lower levels than conventional current probes. In addition, its secondary may be used as an isolating inductor in the power line during transient susceptibility tests. The transformer is capable of handing up to 200 watts of audio power into its primary over the frequency range 30 Hz to 250 KHz. The turns ratio provides a two-to-one step down to the special secondary winding. The secondary will handle up to 50 A of AC or DC without saturating the transformer.

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

Features

  • a.c. or d.c. through the secondary in series with the test sample
  • Capable of handling the audio power required by EMI specifications and up to 50 amperes of
  • May be used as a pickup device or an isolating inductor in other tests.
  • Provides a convenient bench model unit with three-way binding posts on primary and output voltmeter leads. Standard 0.75" spacing of binding posts allows use of standard plugs. High current secondary
  • Suitable for fastening to the bench top in permanent test setups.

Specifications

    General
  • Audio Power: 200 watts.
  • Dielectric Test: 600 volts d.c. primary to secondaries and each winding to end bells.
  • Frequency Response: 30 Hz to 250 KHz.
  • Primary: Less than 5 ohms.
  • Secondary: One-fourth the primary impedance.
  • Secondary Inductance: Approximately 1.0 mH unloaded).
  • Secondary Saturation: 50 amperes a.c. or d.c.maximum.
  • Size: 4.5" wide, 5.25 " high, 6.25" deep plus terminals. (114 mm x 133 mm x 159 mm.)
  • Turns Ratio: Two-to-one step down.
  • Weight: 18 pounds.

 

Applications

  • None Available

Aliases

  • None Available